Devolo dLAN 200 DSpro, Руководство пользователя

Страница: 13 / 82

|
Telnet to the dLAN 200 DSpro Adapter
13
|
devolo dLAN 200 DSpro Manual
|
Figure 3: DHCP Config-
uration Process
The process involves 4 steps: DHCP discover, DHCP offer, DHCP request, and
DHCP acknowledge. Discover and request are issued by the dLAN 200 DSpro
adapter, while offer and acknowledge are issued by the computer.
Once the dLAN 200 DSpro adapter has an IP address, you should be able to ping
it and telnet to it.
7 Telnet to the dLAN 200 DSpro Adapter
The dLAN 200 DSpro adapter has a console where the configuration can be
changed and checked. The console can provide useful information about the
status of the dLAN 200 DSpro adapter and the connectivity to its neighbours.
To open a telnet session to the dLAN 200 DSpro adapter, we must use a full-
featured telnet client, such as Putty or Secure CRT. From Linux, the regular telnet
will work.
Putty is a free application that provides all of the functionality required to telnet
to the dLAN 200 DSpro adapter.Follow these steps to configure the application:
쐃
Execute the application.
쐇
In the Session section, write the IP of the dLAN 200 DSpro adapter under
"Host Name" and 40000 under "Port".
쐋
In the Terminal section, check the case "Implicit CR in every LF".
쐏
In the Terminal section, select the option "Force On" under "Local Line Edi-
ting".