Auto-configuration
|
|
devolo dLAN 200 DSpro Manual
|
50
guration; when the list is FORBIDDEN, the list is reset and only tags defined
with
PROFILE_OVLAN_ADD_TAG
will be in the list.
쎲
PROFILE_FWTYPE.i = [MV|LV|EU]
Indicates the firmware type of the user of profile i. If this parameter is not
defined, the firmware type of the RADIUS response or the authorization list
will be applied, if they are available. Otherwise, the value LV will be applied.
In the current FW version, the maximum number of profiles is 16.
12.8.4.7
Translation Table Parameters
쎲
TRANSLATION_MNMT_VLAN = [2-4093]
Translation table management VLAN tag.
쎲
TRANSLATION_DATA_VLAN.i = [2-4093]
Translation table data operator i VLAN tag. Up to 16 tags.
쎲
TRANSLATION_VOIP_VLAN.i = [2-4093]
Translation table VoIP operator i VLAN tag. Up to 16 tags.
쎲
TRANSLATION_ROOTPATH_OVLAN = [2-4094]
Translation table rootpath OVLAN.
WARNING:
When the dLAN 200 DSpro adapter is going to boot in NVRAM
mode, IFCP is not performed, so the translation table is not exchanged bet-
ween the different PLC nodes. It is mandatory to add the translation table
to all configuration files (MV, LV and EU) to configure any dLAN 200 DSpro
adapter for booting from NVRAM.
12.8.4.8
VLAN Parameters
쎲
VLAN_ENABLE = [yes|no]
Enables/disables the use of VLAN.
WARNING:
Normally this parameter is not needed because the dLAN 200
DSpro adapter itself discovers the use of VLAN, but it is necessary in case of
booting from NVRAM.
쎲
VLAN_MNMT_TAG = [2-4093] | %<PARAMETRIC VALUE>
Management VLAN tag of high-level FW management protocols. Often
taken from the translation table.
WARNING:
This parameter is mandatory to add in all autoconfiguration
files (MV, LV or EU dLAN 200 DSpro adapters) if the dLAN 200 DSpro adap-
ters are going to boot from NVRAM after the next reset.
Содержание dLAN 200 DSpro
Страница 1: ...dLAN 200 DSpro Manual...
