Devolo dLAN 200 DSpro, Руководство пользователя

Страница: 12 / 82

Providing an IP Address
|
|
devolo dLAN 200 DSpro Manual
|
12
We will use the HaneWin DHCP server to provide a dynamic IP to the dLAN 200
DSpro adapter. Follow the steps below to configure a dynamic range of IP leases
(see Figure 2):
쐃
Start HaneWin DHCP server.
쐇
Go to Options > Default Client Profile.
쐋
In the "Basic Profile" lid, set a rule for "Interface IP".
쐏
Write a range for dynamic IP addresses in the fields "from" and "until".
쐄
Write a subnet mask that is compatible with your computer's subnet mask.
쐂
In the lid "Other", select option 120. Then select type "Binary" and in the
Value field type "0 0 0 0" putting spaces between the zeroes. Finally click
"Add".
Figure 2: Configuration
of the DHCP Server for
Dynamic IP Leases
Shortly after you click OK, the application will provide a dynamic IP address to
the dLAN 200 DSpro adapter. Thisprocess is reflected in Wireshark as shown in
Figure 3.
The option 120 is used to disable IFCP in the DHCP response. This will prevent
that the dLAN 200 DSpro adapter tries to obtain the management VLAN from
another PLC node. In some cases, IFCP has been known to interfere with Win-
dows XP network services.