Devolo dLAN 200 DSpro, Руководство пользователя

Страница: 44 / 82

Auto-configuration
|
|
devolo dLAN 200 DSpro Manual
|
44
쎲
SIGNAL_SUB_MODE = [0| 2| 4| 6]
In HE: Signal mode for transmitting. Each mode has several submodes: 0, 2,
4 and 6. 0 is the default submode and is equivalent to the current definition
of mode. The characteristic that distinguishes the submodes is that every
submode cannot communicate with a different submode from the same
mode and all submodes of a given mode occupy almost the same spectrum.
12.8.4.2 Reception and Transmission Gains Control Parameters
The following parameters must be handled with special care. A poor configura-
tion can produce loss of communication with the dLAN 200 DSpro adapter
through PLC. Normally all of these settings are related to a SIGNAL_MODE.
Correct settings in one mode do not mean it is correct in others.
Reception Gain Parameters (Automatic Gain Control parameters)
쎲
AGC_RX_ENABLE = [0|1]
Disables/enables the HW AGC. Default value: 1.
WARNING: If the AGC is disabled, it will remain disabled, even if the signal
mode changes.
쎲
AGC_RX_FIX_GAIN = [0-7]
Fix reception gain, only valid if the HW AGC is disabled. Default value: 7.
WARNING: If the reception gain is fixed, it will remain fixed, even if the sig-
nal mode changes.
쎲
AGC_MAX_RX_GAIN = [0-7]
Fix the maximum reception gain for the HW AGC. Default value: 7.
WARNING: If the maximum reception gain is fixed, it will remain fixed, even
if the signal mode changes.
쎲
AGC_MIN_RX_GAIN = [0-7]
Fix the minimum reception gain for the HW AGC. Default value: 0.
WARNING: If the minimum reception gain is fixed, it will remain fixed, even
if the signal mode changes.