![Denon ADV-700 Скачать руководство пользователя страница 7](http://html1.mh-extra.com/html/denon/adv-700/adv-700_operating-instructions-manual_2481707007.webp)
7
ENGLISH
(4) Connecting the antenna terminals
R
L
SPEAKER SYSTEMS
6 16
R
L
R
L
IMPEDANCE
CENTER
SURR
FRONT
AM
FM COAX. 75
LOOP
ANT.
AM LOOP
ANTENNA
(Supplied)
AM OUTDOOR
ANTENNA
GROUND
FM ANTENNA
ADAPTER
(Supplied)
FM INDOOR
ANTENNA
(Supplied)
DIRECTION OF
BROADCASTING
STATION
FM ANTENNA
75
Ω
/ohms
COAXIAL
CABLE
• An F-type FM antenna cable plug can be connected directly.
• If the FM antenna cable’s plug is not of the F-type, connect using the included antenna adapter.
1
4
2
3
AM loop antenna assembly
Connect to the AM
antenna terminals.
Bend in the reverse
direction.
Remove the vinyl tie
and take out the
connection line.
a. With the
antenna on top
any stable
surface.
Mount
b. With the
antenna
attached to a
wall.
Installation hole
Mount on wall, etc.
Connection of AM antennas
1. Push the lever. 2. Insert the conductor.
3. Return the lever.
Notes:
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not disconnect
the AM loop antenna.
• Make sure AM loop antenna lead terminals do not touch
metal parts of the panel.
14m
m
9m
m
14m
m
19m
m
5m
m
5m
m
5C-2V
3C-2V
5C-2V
FM antenna adopter assembly
75
Ω
/ohms COAXIAL CABLE
SHUT
CLAMP
Open the cover
PULL
CLAMP
PULL
ANTENNA ADAPTER
REMOVE
CLAMP
CLAMP
SHUT
(5) Connecting to a TV with 21-pin SCART Terminal
•
Use the commercially 21-pin SCART cable to connect the TV’s 21-pin SCART terminal to the ADV-700’s 21-pin SCART terminal
(AV1).
VIDEO
MON.OUT
S VIDEO
IN
IN
IN
IN
OUT
TV/DBS
V.AUX
VCR
R
L
AUDIO
IN
OUT
IN
IN
IN
IN
OUT
V.AUX
TV/DBS
VCR
CDR/
TAPE
PRE OUT
SUB WOOFER
IN
IN
OUT
V.AUX
TV/DBS
(OPTICAL)
DIGITAL
SPEAKER SYSTEMS
6 16
R
L
R
L
IMPEDANCE
CENTER
SURROUND
FRONT
MON.OUT
AM
FM COAX. 75
LOOP
ANT.
AV 1
ADV-700
TV
21-pin SCART terminal
•
The audio and video signals for the function selected on the set are output.
Audio output signals
• The tuner and DVD audio playback signals and the audio signals input to the AUDIO INPUT jacks are output.
• When a Dolby Digital DVD is played, the audio signals are converted to 2-channel signals before being output. (Audio signals
are not output during DTS playback.)
• The audio output level is fixed. If you do not wish to play the sound on the connected TV, turn the TV’s volume down to the
minimum.
Video output signals
• The DVD video playback signals and the video signals input to the VIDEO or S-VIDEO INPUT jacks are output.
• When playing a DVD, RGB video signals can also be output.
• The selection of the VIDEO, S-VIDEO and DVD RGB video signals is set at “AV1 VIDEO OUTPUT” system setup item. (By
default all are set to “VIDEO”. See page 16.)
•
Some discs contain copy prohibit signals. If such discs are
played via a VCR, the copy prohibit system may cause
disturbance in the picture.
•
Set the “TV TYPE“ in “VIDEO SETUP“ in “DVD SETUP“
to comply with your TV's video format. When the TV is
PAL formated, set to PAL. (See page 42.)
NOTES: