DESIGNER’S HANDBOOK 4189350049C EN
Page 96 of 206
Now the toggle sequence for this indicator is changed.
If you for example in the virtual wind indicator above only want to use Screen 1 and 4, then just set the mode 1 to
4 like this:
Now XDi-N will toggle Sc.1, Sc.4, Sc.1, Sc.4 and so on.
8.3.4.1 How to fix data lost warning when not all screens are used
If you select not to use a screen in the mode toggle sequence, you may still get a data lost warning from the
screen that is never presented. It can easily be fixed by entering the XDi installation menu and select: Edit virtual
indicator \ Indicators where you select the data type (or types) that is not presented/available and press OK to
access the setup menu where you must set Visible to OFF.
In the following example we don’t have data for the true wind relative to ship (orange arrow pointer), we only
have relative and geographic true wind data. Therefore, we only toggle between screen 1 and 3, screen 2 and 4 is
never used. To avoid a data lost warning for True wind direction relative to ship (Wind Dir TS) we enter the
installation menu and turn the visibility for this parameter OFF. When a parameter is not visible it will not create a
data lost. The following pictures shows how to turn visibility off.
Toggle with front button 1
