DESIGNER’S HANDBOOK 4189350049C EN
Page 183 of 206
12.3 Display calibration
When the calibration menu is entered the adjustment display will look like below.
Display calibration screen
The selected parameter to be adjusted is marked with the black cursor frame.
12.3.1
Menu functions
The calibration menu has 2 main functions:
1) Adjust the red, green and blue colours
2) Adjust the max backlight level at 100% Dimmer setting (max level is 250)
12.3.2
Colour adjustment
You can adjust red, green and blue colour individually by highlighting the field:
Using the front button
˄ or ˅
you can adjust the red colour from 0 to 252. (Steps size is 4)
You will immediately see the change on the white background colour on the calibration screen.
When you have a new unit all colours are at level 252.
If you want to match an old display where the white background is bluish then you must reduce the red and green
colour to get the same blue colour appearance on the new service unit.
This can be quite time consuming to adjust the 2 colours independently.
Based on our experiments with manual colour adjustment, we have made a “smart function” on each colour
When you for example has a bluish display,
you can select the blue “smart function” by pushing the “SEL” button
several times until you have this field highlighted by the black frame cursor, as shown:
You will now be able to adjust the blue appearance of the display and not necessarily the blue colour itself.
When you have a new XDi service unit, all colours are at 252.
