DATREND Systems AMPS-1, Руководство по эксплуатации

Страница: 86 / 100

AMPS-1 OPERATING MANUAL
To edit an Auto setup, double-click on a row in the table, or highlight the row and then
press the "Edit Auto Selection" button (pencil icon).
You can name or rename any of the Auto setups using up to 20 characters.
Using the "Type of Auto" drop-down, choose the desired type of Auto setup ( Figure
72 ).
As shown in Figure 72 , each type of Auto will provide specific simulator parameters
and a range of settings for each parameter. Each Auto may include up to 10 such
settings.
When you are finished editing the Auto setups, click OK to exit the editor. Press “Set
Auto Selections” to upload the Auto setups to AMPS-1 via the RS-232 connection.
AMPSpc will give an indication of progress ( Figure 73 ), although the AMPS-1 display
will remain unchanged during the upload.
For the settings to take effect, it is necessary to restart AMPS-1. After uploading, reset
AMPS-1 by switching the power off, waiting one second, then switching the power
back on.
Figure 73 - Select type of Auto
Figure 74 - AMPSpc Progress Indicator
AMPSpc Companion Software/Chapter 13
#
Page 72