DATREND Systems AMPS-1, Руководство по эксплуатации

Страница: 31 / 100

AMPS-1 OPERATING MANUAL
ECG RATE
=<
RATE: 30BPM
Figure 13 - ECG RATE
ECG AMPLITUDE =<
AMPL: 0.1mV
Figure 14 - ECG AMPLITUDE
3.4 ECG Function
Parameters provided for the ECG function are: Rate; Amplitude; Baseline; and
Artifact.
Press the ECG(1) button to change the LCD display to that of Figure 13 , the ECG
Rate Menu.
Press the UP (
•
) or DOWN(
–
) arrow button to scroll through the settings provided
for the ECG rate: 30, 40, 60, 80, 100, 120, 140, 160, 180, 200, 220, 240, 260, 280 and
300 BPM.
Press the ENTER button to activate the desired rate. The change in rate can be
observed via the green LED above the ECG button, or through an ECG monitor if
such a monitor is connected.
While viewing the display of Figure 13 , pressing the RIGHT (
u
) arrow button once
will change the display to that of Figure 14 , the ECG Amplitude Menu.
Press the UP (
•
) or DOWN(
–
) arrow button to scroll through the settings provided
for the ECG amplitude: 0.1, 0.25, 0.5, 1, 2, 3, 4 and 5mV. If finer control of the
amplitude is desired, go to the PERFormance AMPLitude setting and select from 0.05
to 5.50 mV in 0.05 mV steps. This amplitude setting will remain in effect in the ECG
setting until another AMPLitude is selected.
Press the ENTER button to activate the desired amplitude. The ECG monitor should
show an immediate change in signal amplitude.
ECG Normal Sinus Rhythm/Chapter 3
#
Page 17