Danfoss VLT Automation VT Drive FC 322 Скачать руководство пользователя страница 67

Страница: 67 / 304

2.5 Main Menu - Limits/Warnings - Group 4

2.6.1 4-** Limits and Warnings

Parameter group for configuring limits and warnings.

2.6.2 4-1* Motor Limits

Define torque, current and speed limits for the motor, and the reaction of the frequency converter when the limits are exceeded.

A limit may generate a message on the display. A warning will always generate a message on the display or on the fieldbus. A monitoring function may

initiate a warning or a trip, upon which the frequency converter will stop and generate an alarm message.

4-10 Motor Speed Direction

Option:

Function:

Selects the motor speed direction required. When par. 1-00 Configuration Mode is set to Closed loop

[3], the parameter default is changed to Clockwise [0]. If both directions are chosen, running in

Counter Clockwise direction cannot be chosen from the LCP.

[0] *

Clockwise

[2]

Both directions

Selects the motor speed direction required.

4-11 Motor Speed Low Limit [RPM]

Range:

Function:

Application

dependent*

[Application dependant]

4-12 Motor Speed Low Limit [Hz]

Range:

Function:

Application

dependent*

[Application dependant]

4-13 Motor Speed High Limit [RPM]

Range:

Function:

Application

dependent*

[Application dependant]

NB!

The output frequency value of the frequency converter must not exceed a value higher than 1/10 of the switching frequency.

NB!

Any changes in par. 4-13

Motor Speed High Limit [RPM]

will reset the value in par. 4-53

Warning Speed High

to the same value as set

in par. 4-13

Motor Speed High Limit [RPM]

VLT

Automation VT Drive FC322

Programming Guide

2 Parameter Description

MG.20.W1.22 - VLT

is a registered Danfoss trademark

Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com

http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx

Содержание VLT Automation VT Drive FC 322

















































































































































































































































































































Результаты поиска

Содержание VLT Automation VT Drive FC 322

Отзывы:

Похожие инструкции для VLT Automation VT Drive FC 322

Бренды по названию

Популярные бренды

Danfoss VLT Automation VT Drive FC 322, Руководство по программированию

Результаты поиска

Содержание VLT Automation VT Drive FC 322

Отзывы:

Похожие инструкции для VLT Automation VT Drive FC 322

Бренды по названию

Популярные бренды