manualshive.com logo in svg

Danfoss VLT Automation VT Drive FC 322, Руководство по программированию

Инструкция по эксплуатации для Danfoss VLT Automation VT Drive FC 322 доступна для бесплатного скачивания на нашем сайте. Получите руководство пользователя с подробными инструкциями по настройке и эксплуатации продукта. Не упустите возможность загрузить его сейчас с manualshive.com.

Поделиться
Скачать
background image

2 Parameter Description

2.1.1 Parameter Set-Up 

Overview of parameter groups

Group

Title

Function

0-

Operation / Display

Parameters related to the fundamental functions of the frequency converter, function of

the LCP buttons and configuration of the LCP display.

1-

Load / Motor

Parameter group for motor settings.

2-

Brakes

Parameter group for setting brake features in the frequency converter.

3-

Reference / Ramps

Parameters for reference handling, definitions of limitations, and configuration of the re-

action of the frequency converter to changes.

4-

Limits / Warnings

Parameter group for configuring limits and warnings.

5-

Digital In/Out

Parameter group for configuring the digital inputs and outputs.

6-

Analog In/Out

Parameter group for configuration of the analog inputs and outputs.

8-

Communication and Options

Parameter group for configuring communications and options.

9-

Profibus

Parameter group for Profibus-specific parameters.

10-

DeviceNet Fieldbus

Parameter group for DeviceNet-specific parameters.

13-

Smart Logic

Parameter group for Smart Logic Control

14-

Special Functions

Parameter group for configuring special frequency converter functions.

15-

Drive Information

Parameter group containing frequency converter information such as operating data,

hardware configuration and software versions.

16-

Data Readouts

Parameter group for data read-outs, e.g. actual references, voltages, control, alarm,

warning and status words.

18-

Info and Readouts

This parameter group contains the last 10 Preventive Maintenance logs.

20-

Drive Closed Loop

This parameter group is used for configuring the closed loop PID Controller that controls

the output frequency of the unit.

21-

Extended Closed Loop

Parameters for configuring the three Extended Closed Loop PID Controllers.

22-

Application Functions

These parameters monitor water applications.

23-

Time-based Functions

These parameters are for actions needed to be performed on a daily or weekly basis, e.g.

different references for working hours/non-working hours.

25-

Basic Cascade Controller Functions

Parameters for configuring the Basic Cascade Controller for sequence control of multiple

pumps.

26-

Analog I/0 Option MCB 109

Parameters for configuring the Analog I/0 Option MCB 109.

27-

Extended Cascade Control

Parameters for configuring the Extended Cascade Control.

29-

Water Application Functions

Parameters for setting water specific functions.

31-

Bypass Option

Parameters for configuring the Bypass Option

Table 2.1: Parameter Groups

Parameter descriptions and selections are displayed on the graphic (GLCP) or numeric (NLCP) in the display area. (See Section 5 for details.) Access the

parameters by pressing the [Quick Menu] or [Main Menu] key on the control panel. The quick menu is used primarily for commissioning the unit at start-

up by providing those parameters necessary to start operation. The main menu provides access to all parameters for detailed application programming.

All digital input/output and analog input/output terminals are multifunctional. All terminals have factory default functions suitable for the majority of water

applications but if other special functions are required, they must be programmed in parameter group 5 or 6.

VLT

p

 Automation VT Drive FC322

Programming Guide

2 Parameter Description

MG.20.W1.22 - VLT

p

 is a registered Danfoss trademark

21

  2

Remote Site Products  -  1-888-532-2706  -  www.remotesiteproducts.com

http://www.remotesiteproducts.com/p-20772-Danfoss-131X8135-VLT-Automation-VT-Drive-VFD-FC322-230V-5-HP.aspx

Содержание VLT Automation VT Drive FC 322

















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для VLT Automation VT Drive FC 322

Quectel BG96 At Command Manual preview
BG96
Бренд: Quectel Страницы: 23
Quectel BG96 Hardware Design preview
BG96
Бренд: Quectel Страницы: 79
Dakota Digital BIM-17-2 Manual preview
BIM-17-2
Бренд: Dakota Digital Страницы: 6
Dakota Digital CMD-2000 Series Manual preview
CMD-2000 Series
Бренд: Dakota Digital Страницы: 10
Z-Wave RC-100 Quick Setup Manual preview
RC-100
Бренд: Z-Wave Страницы: 6
Garmin TR-1 Gold Installation Instructions preview
TR-1 Gold
Бренд: Garmin Страницы: 4
Vaillant VRT 340f Operating Instruction preview
VRT 340f
Бренд: Vaillant Страницы: 32
Vaillant VRT 330 Manual preview
VRT 330
Бренд: Vaillant Страницы: 27
Vaillant VRC 470 Operating Instructions Manual preview
VRC 470
Бренд: Vaillant Страницы: 40
Vaillant VRT 350f Installation Instructions Manual preview
VRT 350f
Бренд: Vaillant Страницы: 36
Vaillant VRT 350 Installation Instructions Manual preview
VRT 350
Бренд: Vaillant Страницы: 28
Vaillant VAZ CPC Operating Instructions Manual preview
VAZ CPC
Бренд: Vaillant Страницы: 92
Kunert Professional LAVADO Operating Manual preview
LAVADO
Бренд: Kunert Professional Страницы: 29
ASROCK iEP-5000G Series Quick Installation Manual preview
iEP-5000G Series
Бренд: ASROCK Страницы: 2
Runxin N74Q1 Quick Start Manual preview
N74Q1
Бренд: Runxin Страницы: 4
Viva VRM2 Instruction Manual preview
VRM2
Бренд: Viva Страницы: 9
Thorlux Lighting SmartScene IR Remote Series Installation Instructions preview
SmartScene IR Remote Series
Бренд: Thorlux Lighting Страницы: 2
DAY 72847 Instruction Manual preview
72847
Бренд: DAY Страницы: 23

Бренды по названию

Популярные бренды

Загрузить еще бренды