Dalsa FA-80-12M1H-XX-R, Руководство пользователя

Страница: 20 / 125

20 • Software and Hardware Setup
!
Static electricity can damage electronic components. It’s critical that you discharge any
static electrical charge by touching a grounded surface, such as the metal computer chassis,
before performing handling the camera hardware.
Power Connector
WARNING: It is extremely important that you apply the appropriate voltages to
your camera. Incorrect voltages may damage the camera. Input voltage
requirement: +12 VDC to +24 VDC (± 5 %), 2 Amps. Before connecting power to
the camera, test all power supplies.
Figure 7: 12-pin Hirose Circular Male Power Plug—Power Connector
Table 6. Power Plug Pinout
Pin Description Pin Description
1 GND 7 OUT2+
2 +12 V to +24 V DC 8 OUT2-
3 OUT1- 9 NC
4 OUT1+ 10 NC
5 IN1-/Trigger 11 IN2+/Trigger
6 IN1+/Trigger 12 IN2-/Trigger
WARNING: When setting up the camera’s power supplies follow these guidelines:
•
Apply the appropriate voltages.
• Protect the camera with a 2 amp slow-blow fuse between the power supply and
the camera.
•
Do not use the shield on a multi-conductor cable for ground.
1
2
3
4
5
6
7
8
9
10
11
12
!