Appendix E: Three Letter Commands
•
107
Getting Parameters (gcp or get)
The gcp command provides a snapshot of all of the camera’s settings. It is a good place to
start to get familiar with the camera’s capabilities and features. In addition to the gcp
command, the get command provides a way to get the value associated with a given
command (eg. get ssf returns the framerate).
Commands
Full Name
area of interest - height
Mnemonic
aih
Argument(s)
height
2
to max height
Max height determined by model and aspect ratio
In increments of 2
GenICam
Height
Release
6
Notes
The values will be rounded to the nearest increment.
Changing the aspect ratio will change the values of the AOI
Full Name
area of interest - width
Mnemonic
aiw
Argument(s)
width
512
to max width
Max width determined by model and aspect ratio
In increments of 128
GenICam
Width
Release
6
Notes
The values will be rounded to the nearest increment.
Changing the aspect ratio will change the values of the AOI
Full Name
area of interest - offset y
Mnemonic
aiy
Argument(s)
offset
0 to (max height – Height) in increments of 2
Max height determined by model and aspect ratio
in increments of 2
GenICam
OffsetY
Release
6
Notes
The values will be rounded to the nearest increment.
Changing the aspect ratio will change the values of the AOI
Содержание FA-80-12M1H-XX-R
Страница 1: ...Falcon2 Camera User s Manual 4M 8M and 12M Area Imaging P N 03 032 20107 04 www teledynedalsa com ...
Страница 14: ...14 The Falcon2 Cameras Figure 3 Quantum Efficiency INSERT QE GRAPH HERE ...
Страница 17: ...The Falcon2 Cameras 17 Mechanicals Figure 5 Camera Mechanical ADD MECHANICAL PDF HERE ...
Страница 53: ...Camera Operation 53 Figure 19 Advanced Processing Control ...
