Dalsa FA-80-12M1H-XX-R Скачать руководство пользователя

Страница: 2 / 125

•

The Falcon2 Cameras

Notice

All information provided in this manual is believed to be accurate and reliable. No

responsibility is assumed by Teledyne DALSA for its use. Teledyne DALSA reserves the right

to make changes to this information without notice. Reproduction of this manual in whole or

in part, by any means, is prohibited without prior permission having been obtained from

Teledyne DALSA.

Microsoft and Windows are registered trademarks of Microsoft Corporation in the United

States and other countries. Windows, Windows 7, Windows 8 are trademarks of Microsoft

Corporation.

All other trademarks or intellectual property mentioned herein belong to their respective

owners.

Document Date: August 25, 2017

Document Number: 03-032-20107-04

Contact Teledyne DALSA

Teledyne DALSA is headquartered in Waterloo, Ontario, Canada. We have sales offices in

the USA, Europe and Asia, plus a worldwide network of representatives and agents to serve

you efficiently. Contact information for sales and support inquiries, plus links to maps and

directions to our offices, can be found here:

Sales Offices:

http://www.teledynedalsa.com/corp/contact/offices/

Technical Support:

http://www.teledynedalsa.com/imaging/support/

About Teledyne DALSA

Teledyne DALSA is an international high performance semiconductor and electronics

company that designs, develops, manufactures, and markets digital imaging products and

solutions, in addition to providing wafer foundry services.

Teledyne DALSA Digital Imaging offers the widest range of machine vision components in

the world. From industry-leading image sensors through powerful and sophisticated

cameras, frame grabbers, vision processors and software to easy-to-use vision appliances

and custom vision modules.

Содержание FA-80-12M1H-XX-R






























































































































Результаты поиска

Содержание FA-80-12M1H-XX-R

Отзывы:

Похожие инструкции для FA-80-12M1H-XX-R

Бренды по названию

Популярные бренды

Dalsa FA-80-12M1H-XX-R, Руководство пользователя

Результаты поиска

Содержание FA-80-12M1H-XX-R

Отзывы:

Похожие инструкции для FA-80-12M1H-XX-R

Бренды по названию

Популярные бренды