DFX-7
Ultrasonic Flaw Detector
23
RF View
Rectified (RECT) View
BSCAN View
DIGITS View
In the upper left corner of each of the display photos above, is the repeatability
indicator. The repeatability indicator is represented by six vertical bars and
represents how repeatable the measurements are. In regular measurement mode,
the
DFX-7
makes 8 measurements a second. In scan mode, the
DFX-7
makes 200
measurements a second. If the coating mode option is activated, the
DFX-7
makes 3
measurements a second in regular measurement mode and 65 measurements a
second in scan mode. When the
DFX-7
is idle, only the left vertical bar will be
displayed. However, when the
DFX-7
is making a measurement, four or five of the
bars should be displayed on the repeatability indicator. If fewer than four bars are
showing, the
DFX-7
is having difficulty achieving a stable measurement and the
thickness value displayed is potentially unstable.
Содержание DFX-7
Страница 35: ...Dakota Ultrasonics 34 Note Sets where the detection will occur on the negative or positive going echoes...
Страница 219: ...Dakota Ultrasonics 82 10 Finally press the MEAS key to return to the measurement screen and begin taking readings...
Страница 308: ...171 APPENDIX B SETUP LIBRARY Num Name Comment 1 Gn AGC Velocity 1 Enter Custom Name 2 3 4 5 6...
