Dakota Ultrasonics
100
3) Use the
UP,
DOWN, LEFT, & RIGHT
arrow keys to highlight the appropriate
alpha characters.
4) Press the
ENTER
key to select a character and advance to the next field of
the
Grid
or
Seq Note
.
5) Use the
CLR
key to backspace if necessary.
6) Repeat steps
3
through
5
until the
Grid
or
Seq Note
is completed.
7) Press the
OK
key to save the
Grid
or
Seq Note
and return to the
Grid
or
Seq List Items
menu, or
ESC
to cancel entering the
Grid
or
Seq Note
.
Setting the Coordinates or Start & Stop ID’s
Grid:
A grid is defined by using coordinates to define the
Top Left
and the
Bottom Right
corners of the grid. Alpha coordinates are horizontal across the
top, and numeric coordinates are vertical down the side. Therefore, to define
the top left corner of the grid, there will be an (X,Y) coordinate. Where X is an
alpha column location across the top and Y is a numeric row location down the
side. Use the same logic when choosing the lower right corner. An individual
grid can be up to 999 rows and 52 columns.
Содержание DFX-7
Страница 35: ...Dakota Ultrasonics 34 Note Sets where the detection will occur on the negative or positive going echoes...
Страница 219: ...Dakota Ultrasonics 82 10 Finally press the MEAS key to return to the measurement screen and begin taking readings...
Страница 308: ...171 APPENDIX B SETUP LIBRARY Num Name Comment 1 Gn AGC Velocity 1 Enter Custom Name 2 3 4 5 6...
