manualshive.com logo in svg

DAKOTA ULTRASONICS DFX-7, Руководство пользователя, Страница: 198 / 309

Поделиться
Скачать
DAKOTA ULTRASONICS DFX-7 Скачать руководство пользователя страница 198

DFX-7

 Ultrasonic Flaw Detector 

61 

7.1 Display Views 

 

 

DIGITS VIEW 

DIGITS 

The Digits view is a basic digital thickness gauge look and feel.  The larger digits 
make it much easier for the operator to monitor the thickness readings.  The Scan 
Bar has also been added to the Digits view to provide the user with yet another visual 
tool for easily monitoring changes in thickness readings due to internal flaws or 
defects. 
 
The following is a list of the viewable features on the display: 
 

A. 

Repeatability/Stability Indicator

 – This indicator should be commonly used 

in conjunction with the digital thickness values displayed.  When all the vertical 
bars are fully illuminated and the last digit on the digital thickness value is 
stable, the 

DFX-7

 is reliably measuring the same value 3 to 200 times per 

second, depending on which measurement mode and features are enabled. 

B. 

Battery Icon

 – Indicates the amount of battery life the 

DFX-7

 has remaining. 

C. 

Velocity

 – The material velocity value the 

DFX-7

 is currently using or 

calibrated for.  Displayed in English or Metric units, depending on the what 
units the gauge is set for. 

D. 

Feature Status Bar

 – Indicates the features currently enabled and in use in 

the following order: 

•

  Measurement Mode (P-E, PECT, PETP, E-E, E-EV, COAT) 

•

  Differential Mode (ON/OFF) 

•

  High Speed Scan Mode (ON/OFF) 

Содержание DFX-7






















































































































































































































































































































Отзывы:

Нет отзывов