Dakota Ultrasonics
118
2) Use the
UP
and
DOWN
arrow keys to scroll through the sub menu items
until
VIEW
is highlighted.
3) Press the
ENTER
key to display a list of the color scheme options.
4) Press the
UP
and
DOWN
arrow keys to scroll through the material list until
the appropriate material is highlighted.
5) Press the
ENTER
key, followed by pressing the OK key, to overwrite the
current color scheme with the selected scheme.
6) Finally, press the
MEAS
key to return to the measurement screen and begin
taking readings.
10.7 DIM
The
DFX-7
has a built-in
DIM
feature to manage power more effectively. This feature
has adjustable time durations, until the power of the display is dimmed and current
draw reduced. The timer is constantly reset while the user is making measurements,
and is only activated when the gauge is idle for the duration of time the
DIM
value is
set for. This feature does not override the preset 5 min idle power off feature in any
way. However, if the gauge is turned on, set for a DIM of 120sec, and then left idle
for 5 minutes, the
DFX-7
will dim in 2 minutes, then power off in 5 minutes. The
procedures for adjusting the
DIM
time are outlined below:
Содержание DFX-7
Страница 35: ...Dakota Ultrasonics 34 Note Sets where the detection will occur on the negative or positive going echoes...
Страница 219: ...Dakota Ultrasonics 82 10 Finally press the MEAS key to return to the measurement screen and begin taking readings...
Страница 308: ...171 APPENDIX B SETUP LIBRARY Num Name Comment 1 Gn AGC Velocity 1 Enter Custom Name 2 3 4 5 6...
