![background image](http://html1.mh-extra.com/html/daikin/super-multi-nx-3mks50e3v1b/super-multi-nx-3mks50e3v1b_service-manual_4197354240.webp)
RA Indoor Unit
SiBE121135
228
Operation Manual
1.Use as an energy-saving mode.
• Every day before you leave the house...
• Before bed...
2.Use as a favorite mode.
NOTE
Is there a set temperature and air flow rate which is most comfortable, a set temperature and air flow
rate which you use the most? HOME LEAVE operation is a function that allows you to record your
favorite set temperature and air flow rate. You can start your favorite operation mode simply by pressing
the HOME LEAVE button on the remote controller. This function is convenient in the following situations.
Set the temperature 2-3˚C higher (cooling) or lower (heating) than normal. Setting the fan strength to the lowest
setting allows the unit to be used in energy-saving mode. Also convenient for use while you are out or sleeping.
When you go out, push the “HOME LEAVE
Operation” button, and the air conditioner
will adjust capacity to reach the preset
temperature for HOME LEAVE Operation.
When you return, you will be
welcomed by a comfortably
air conditioned room.
Push the “HOME LEAVE Operation”
button again, and the air conditioner
will adjust capacity to the set
temperature for normal operation.
Set the unit to HOME LEAVE
Operation before leaving the
living room when going to bed.
The unit will maintain the
temperature in the room at a
comfortable level while you
sleep.
When you enter the living room in the
morning, the temperature will be just
right. Disengaging HOME LEAVE
Operation will return the temperature to
that set for normal operation. Even the
coldest winters will pose no problem!
Once you record the temperature and air flow rate settings you most often use, you can retrieve them by
pressing HOME LEAVE button. You do not have to go through troublesome remote control operations.
What’s the HOME LEAVE operation?
Useful in these cases
• Once the temperature and air flow rate for HOME LEAVE operation are set, those settings
will be used whenever HOME LEAVE operation is used in the future. To change these
settings, please refer to the “Before using HOME LEAVE operation” section above.
• HOME LEAVE operation is only available in COOL and HEAT mode. Cannot be used in
AUTO, DRY, and FAN mode.
• HOME LEAVE operation runs in accordance with the previous operation mode (COOL or
HEAT) before using HOME LEAVE operation.
• HOME LEAVE operation and POWERFUL operation cannot be used at the same time.
Last button that was pressed has priority.
• The operation mode cannot be changed while HOME LEAVE operation is being used.
• When operation is shut off during HOME LEAVE operation, using the remote controller or
the indoor unit ON/OFF switch, “
” will remain on the remote controller display.
Содержание Super Multi NX 3MKS50E3V1B
