Daikin Super Multi NX 3MKS50E3V1B, Руководство по обслуживанию

Страница: 163 / 462

SiBE121135 RA Indoor Unit
Operation Manual 151
„
To adjust the airflow rate setting
Press .
• Each pressing of advances the airflow rate setting in sequence.
Auto
Indoor unit quiet
Low
Middle low
High Middle high Middle
• When the airflow is set to “ ”, indoor unit quiet operation will start and the noise
from the unit will become quieter.
• In indoor unit quiet operation, the airflow rate is set to a weak level.
• If the temperature does not reach the desired point in the indoor unit quiet operation,
change the airflow rate setting.
• In DRY mode, the airflow rate setting is not variable.
• Always use a remote controller to adjust the angles of the flap. If you attempt to move the flap and louvers forcibly with hand when they are
swinging, the mechanism may be broken.
• Be careful when adjusting the louvers.
Inside the air outlet, a fan is rotating at a high speed.
• If the air conditioner is operated in COOL or DRY operation with the flap kept stopped in the downward direction, the flap will automatically
start operating in approximately an hour in order to prevent dew condensation.
„
Note on airflow rate setting
• At smaller airflow rates, the cooling (heating) effect is also smaller.
„
Notes on the angles of the flap
• The flap swinging range depends on the operation. (See the figure.)
CAUTION
NOTE
COOL and
DRY operation HEAT operation
FAN operation
Stop operation
COMFORT AIRFLOW
Upper limit
Lower limit
Stop operation
COMFORT AIRFLOW
Upper limit
Lower limit
Stop operation
Upper limit
Lower limit
0˚
5˚
45˚
0˚
15˚
45˚
50˚
0˚
5˚
45˚