D-Link xStack DES-3810, Справочное руководство

Страница: 234 / 477

xStack
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
221
Figure 6-76 VRRP Virtual Router Settings window
The fields that can be configured are described below:
Parameter Description
Interface Name
Specifies the IP interface name used to create a VRRP entry.
State
Specifies the state of the virtual router function of the interface.
Preempt Mode
This entry will determine the behavior of backup routers within the VRRP group by
controlling whether a higher priority backup router will preempt a lower priority Master
router. A True entry, along with having the backup router’s priority set higher than the
masters priority, will set the backup router as the Master router. A False entry will disable
the backup router from becoming the Master router. This setting must be consistent with
all routers participating within the same VRRP group.
VRID (1-255)
Specifies the ID of the Virtual Router used. All routers participating in this group must be
assigned the same VRID value. This value must be different from other VRRP groups set
on the Switch.
Priority (1-254)
Specifies the priority to be used for the Virtual Router Master election process. The VRRP
Priority value may determine if a higher priority VRRP router overrides a lower priority
VRRP router. A higher priority will increase the probability that this router will become the
Master router of the group. A lower priority will increase the probability that this router will
become the backup router. VRRP routers that are assigned the same priority value will
elect the highest physical IP address as the Master router.
Critical IP Address
Specifies an IP address of the physical device that will provide the most direct route to the
Internet or other critical network connections from this virtual router. This must be a real
IP address of a real device on the network. If the connection from the virtual router to this
IP address fails, the virtual router will automatically disabled. A new Master will be elected
from the backup routers participating in the VRRP group. Different critical IP addresses
may be assigned to different routers participating in the VRRP group, and can therefore
define multiple routes to the Internet or other critical network connections.
IP Address
Specifies the virtual router’s IP address used. This IP address is also the default gateway
that will be statically assigned to end hosts and must be set for all routers that participate
in this group.
Advertisement Interval
(1-255)
Specifies the time interval used between sending advertisement messages.
Checking Critical IP
Specifies the state of checking the status (active or inactive) of a critical IP address.
Options to choose from are
Enabled
and
Disabled
.
Click the
Add
button to add a new entry.
Click the
Delete All
button to remove all the entries listed.
Click the
Edit
button to re-configure a specific entry listed.
Click the
Delete
button to remove a specific entry listed.
After clicking the
Edit
button, the following page with be displayed.