xStack
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
264
ICMP
Select this option to specify that the rule will be applied to ICMP traffic.
Type
– Enter the ICMP packet type value used here.
Code
– Enter the ICMP code value used here.
Action
Select
Permit
to specify that the packets that match the access profile are forwarded by
the Switch, according to any additional rule added (see below).
Select
Deny
to specify that the packets that match the access profile are not forwarded by
the Switch and will be filtered.
Time Range Name
Tick the check box and enter the name of the Time Range settings that has been
previously configured in the
Time Range
Settings
window. This will set specific times
when this access rule will be implemented on the Switch.
Ports
Enter the list of ports, used for this configuration, here.
Click the
Apply
button to accept the changes made.
Click the
<<Back
button to discard the changes made and return to the previous page.
After clicking the
Show Details
button in the
CPU
Access Rule List
, the following page will appear:
Figure 8-33 CPU Access Rule Detail Information window (Ethernet ACL)
Click the
Show All Rules
button to navigate back to the CPU Access Rule List.
Adding a CPU IPv6 ACL Profile
The window shown below is the
Add CPU ACL Profile
window for IPv6. To use specific filtering masks in this ACL
profile, click on the packet filtering mask field to highlight it red. This will add more filed to the mask.
After clicking the
Add CPU ACL Profile
button, the following page will appear:
Содержание xStack DES-3810
Страница 1: ......