D-Link xStack DES-3810, Справочное руководство

Страница: 51 / 477

xStack
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
38
Choosing this option will also enable the Switch to be configured for SIM.
Group Name
Enter a Group Name in this textbox. This is optional. This name is used to segment
switches into different SIM groups.
Discovery Interval (30-
90)
The user may set the discovery protocol interval, in seconds that the Switch will send out
discovery packets. Returning information to a Commander Switch will include information
about other switches connected to it. (Ex. MS, CaS). The user may set the Discovery
Interval from
30
to
90
seconds. The default value is
30
seconds.
Hold Time Count (100-
255)
This parameter may be set for the time, in seconds; the Switch will hold information sent
to it from other switches, utilizing the Discovery Interval. The user may set the hold time
from
100
to
255
seconds. The default value is
100
seconds.
Click the
Apply
button to accept the changes made.
After enabling the Switch to be a Commander Switch (CS), the
Single IP Management
folder will then contain four
added links to aid the user in configuring SIM through the web, including
Topology
,
Firmware Upgrade
,
Configuration Backup/Restore
and
Upload Log
.
Topology
This window will be used to configure and manage the Switch within the SIM group and requires Java script to
function properly on your computer.
To view the following window, click
Management > Single IP Management > Topology
, as shown below:
The Java Runtime Environment on your server should initiate and lead you to the
Topology
window, as seen below.
Figure 3-20 Topology window
The
Topology
window holds the following information on the
Data
tab:
Parameter Description
Device Name
This field will display the Device Name of the switches in the SIM group configured by the
user. If no device is configured by the name, it will be given the name default and tagged
with the last six digits of the MAC Address to identify it.
Local Port
Displays the number of the physical port on the CS that the MS or CaS is connected to.
The CS will have no entry in this field.