D-Link xStack DES-3810 Скачать руководство пользователя страница 147

Страница: 147 / 477

xStack

DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide

134

IGMP Multicast Group Profile Settings

Users can add a profile to which multicast address reports are to be received on specified ports on the Switch. This

function will therefore limit the number of reports received and the number of multicast groups configured on the

Switch. The user may set an IP Multicast address or range of IP Multicast addresses to accept reports (Permit) or

deny reports (Deny) coming into the specified switch ports.

To view the following window, click

L2 Features > L2 Multicast Control > Multicast VLAN > IGMP Multicast Group

Profile Settings

, as shown below:

Figure 5-80 IGMP Multicast Group Profile Settings window

The fields that can be configured are described below:

Parameter

Description

Profile Name

Enter a name for the IP Multicast Profile.

Click the

Add

button to add a new entry based on the information entered.

Click the

Find

button to locate a specific entry based on the information entered.

Click the

Delete All

button to remove all the entries listed.

Click the

View All

button to display all the existing entries.

Click the

Group List

link to configure the Multicast Group Profile Address Settings for the specific entry.

Click the

Delete

button to remove the specific entry.

After clicking the

Group List

link, the following page will appear:

Figure 5-81 Multicast Group Profile Multicast Address Settings window

The fields that can be configured are described below:

Parameter

Description

Multicast Address List

Here the user can enter the multicast address list value.

Click the

Add

button to add a new entry based on the information entered.

Click the

<<Back

button to discard the changes made and return to the previous page.

Click the

Delete

button to remove the specific entry.

IGMP Snooping Multicast VLAN Settings

On this page the user can configure the IGMP snooping multicast VLAN parameters.

Содержание xStack DES-3810






























































































































































































































































































































































































































































































Результаты поиска

Содержание xStack DES-3810

Отзывы:

D-Link xStack DES-3810, Справочное руководство, Страница: 147 / 477

Результаты поиска

Содержание xStack DES-3810

Отзывы: