D-Link xStack DES-3810 Скачать руководство пользователя страница 264

Страница: 264 / 477

xStack

DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide

251

Select

Mirror

to specify that packets that match the access profile are mirrored to a port

defined in the config mirror port command. Port Mirroring must be enabled and a target

port must be set.

Priority (0-7)

Tick the corresponding check box to re-write the 802.1p default priority of a packet to the

value entered in the Priority field, which meets the criteria specified previously in this

command, before forwarding it on to the specified CoS queue. Otherwise, a packet will

have its incoming 802.1p user priority re-written to its original value before being

forwarded by the Switch.
For more information on priority queues, CoS queues and mapping for 802.1p, see the

QoS section of this manual.

Replace Priority

Tick this check box to replace the Priority value in the adjacent field.

Replace DSCP (0-63)

Select this option to instruct the Switch to replace the DSCP value (in a packet that meets

the selected criteria) with the value entered in the adjacent field. When an ACL rule is

added to change both the priority and DSCP of an IPv6 packet, only one of them can be

modified due to a chip limitation. Currently the priority is changed when both the priority

and DSCP are set to be modified.

Replace ToS
Precedence (0-7)

Specify that the IP precedence of the outgoing packet is changed with the new value. If

used without an action priority, the packet is sent to the default TC.

Time Range Name

Tick the check box and enter the name of the Time Range settings that has been

previously configured in the

Time Range

Settings

window. This will set specific times

when this access rule will be implemented on the Switch.

Counter

Here the user can select the counter. By checking the counter, the administrator can see

how many times that the rule was hit.

Ports

Enter the list of ports, used for this configuration, here.

VLAN Name

Specify the VLAN name to apply to the access rule.

VLAN ID

Specify the VLAN ID to apply to the access rule.

Click the

Apply

button to accept the changes made.

Click the

<<Back

button to discard the changes made and return to the previous page.

After clicking the

Show Details

button in the

Access Rule List

, the following page will appear:

Figure 8-17 Access Rule Detail Information window (IPv6 ACL)

Click the

Show All Rules

button to navigate back to the Access Rule List.

Содержание xStack DES-3810






























































































































































































































































































































































































































































































Результаты поиска

Содержание xStack DES-3810

Отзывы:

D-Link xStack DES-3810, Справочное руководство, Страница: 264 / 477

Результаты поиска

Содержание xStack DES-3810

Отзывы: