xStack
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
144
Figure 5-97 IPv4 Max Multicast Group Settings window
The fields that can be configured are described below:
Parameter
Description
Ports / VID List
Please select the appropriate port(s) or VLAN IDs used for the configuration here.
Max Group (1-1024)
Deselect the
Infinite
check box to enter a
Max Group
value here.
Infinite
Here the user can enable or disable the use of the Infinite value.
Action
Here the user can select the appropriate action for this rule. The user can select
Drop
to
initiate the drop action or the user can select
Replace
to initiate the replace action.
Click the
Apply
button to accept the changes made.
Click the
Find
button to locate a specific entry based on the information entered.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
IPv6 Multicast Filtering
Users can add a profile to which multicast address(s) reports are to be received on specified ports on the Switch. This
function will therefore limit the number of reports received and the number of multicast groups configured on the
Switch. The user may set an IPv6 Multicast address or range of IPv6 Multicast addresses to accept reports (Permit) or
deny reports (Deny) coming into the specified switch ports.
IPv6 Multicast Profile Settings
Users can add, delete, and configure the IPv6 multicast profile on this page.
To view the following window, click
L2 Features > Multicast Filtering > IPv6 Multicast Filtering > IPv6 Multicast
Profile Settings
, as shown below:
Figure 5-98 IPv6 Multicast Profile Settings window
The fields that can be configured are described below:
Parameter
Description
Profile ID (1-60)
Enter a Profile ID between
1
and
60
.
Profile Name
Enter a name for the IP Multicast Profile.
Click the
Add
button to add a new entry based on the information entered.
Click the
Find
button to locate a specific entry based on the information entered.
Содержание xStack DES-3810
Страница 1: ......