D-Link xStack DES-3810 Скачать руководство пользователя страница 39

Страница: 39 / 477

xStack

DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide

To view the following window, click

Management > Gratuitous ARP > Gratuitous ARP Global Settings

, as shown

below:

Figure 3-4 Gratuitous ARP Global Settings window

The fields that can be configured are described below:

Parameter

Description

Send On IP Interface
Status Up

The command is used to enable/disable sending of gratuitous ARP request packets while

the IP interface is becoming up. This is used to automatically announce the interface’s IP

address to other nodes. By default, the state is disabled, and only one gratuitous ARP

packet will be broadcast.

Send On Duplicate IP
Detected

The command is used to enable/disable the sending of gratuitous ARP request packet

while a duplicate IP is detected. By default, the state is disabled. For this command, the

duplicate IP detected means that the system received an ARP request packet that is sent

by an IP address that match the system’s own IP address. In this case, the system knows

that somebody out there uses an IP address that is conflict with the system. In order to

reclaim the correct host of this IP address, the system can send out the gratuitous ARP

request packets for this duplicate IP address.

Gratuitous ARP
Learning

Normally, the system will only learn the ARP reply packet or a normal ARP request packet

that asks for the MAC address that corresponds to the system’s IP address. The

command is used to enable/disable learning of ARP entry in ARP cache based on the

received gratuitous ARP packet. The gratuitous ARP packet is sent by a source IP

address that is identical to the IP that the packet is queries for. By default, the state is

disabled.

Click the

Apply

button to accept the changes made.

NOTE:

With the gratuitous ARP learning, the system will not learn new entry but only do the update on the

ARP table based on the received gratuitous ARP packet.

Gratuitous ARP Settings

The user can configure the IP interface’s gratuitous ARP parameter.

To view the following window, click

Management > Gratuitous ARP > Gratuitous ARP Settings

, as shown below:

Figure 3-5 Gratuitous ARP Settings window

The fields that can be configured are described below:

Содержание xStack DES-3810






























































































































































































































































































































































































































































































Результаты поиска

Содержание xStack DES-3810

Отзывы:

D-Link xStack DES-3810, Справочное руководство, Страница: 39 / 477

Результаты поиска

Содержание xStack DES-3810

Отзывы: