D-Link xStack DES-3810 Скачать руководство пользователя страница 395

Страница: 395 / 477

xStack

DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide

382

MIP

This is the control creations of MIPs.

None

– Don’t create MIPs. This is the default value.

Auto

– MIPs can always be created on any ports in this MD, if that port is not configured

with a MEP of this MD. For the intermediate switch in a MA, the setting must be auto in

order for the MIPs to be created on this device.

Explicit

– MIPs can be created on any ports in this MD, only if the next existent lower level

has a MEP configured on that port, and that port is not configured with a MEP of this MD.

SenderID TLV

This is the control transmission of the SenderID TLV.

None

– Don’t transmit sender ID TLV. This is the default value.

Chassis

– Transmit sender ID TLV with chassis ID information.

Manage

– Transmit sender ID TLV with managed address information.

Chassis Manage

– Transmit sender ID TLV with chassis ID information and manage

address information.

Click the

Apply

button to accept the changes made for each individual section.

Click the

Edit

button to re-configure the specific entry.

Click the

Delete

button to remove the specific entry.

NOTE:

The

MD Name

value should be less than 22 characters.

To add a maintenance association (MA), click on the

Add MA

button.

After clicking the

Add MA

button, the following page will appear:

Figure 11-3 CFM MA Settings window

The fields that can be configured are described below:

Parameter

Description

Here the user can enter the maintenance association name.

VID

VLAN Identifier. Different MA must be associated with different VLANs.

Click the

Add

button to add a new entry based on the information entered.

Click the

<<Back

button to discard the changes made and return to the previous page.

Click the

Edit

button to re-configure the specific entry.

Click the

Delete

button to remove the specific entry.

Click the

MIP Port Table

button to view the CFM MIP Table.

Click the

Add MEP

button to add a Maintenance End Point entry.

After clicking the

Edit

button, the following page will appear:

Содержание xStack DES-3810






























































































































































































































































































































































































































































































Результаты поиска

Содержание xStack DES-3810

Отзывы:

D-Link xStack DES-3810, Справочное руководство, Страница: 395 / 477

Результаты поиска

Содержание xStack DES-3810

Отзывы: