xStack
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
168
Figure 6-6 Policy Route Settings window
Click the
Add
button to add a new entry based on the information entered.
Click the
Edit
button to re-configure the specific entry.
Click the
Delete
button to remove the specific entry.
Enter a page number and click the
Go
button to navigate to a specific page when multiple pages exist.
After clicking the
Edit
button, the following page will appear:
Figure 6-7 Policy Route Settings window
The fields that can be configured are described below:
Parameter
Description
Policy Route Name
Enter a name of no more than 32 alphanumeric characters that will be used to identify this
policy route.
Profile ID (1-1024)
Enter the Profile ID number of the Access Profile, previously created, which will be used
to identify packets as following this Policy Route. This access profile, along with the
access rule, must first be constructed before this policy route can be created.
Access ID (1-1024)
Enter the Access ID number of the Access Rule, previously created, which will be used to
identify packets as following this Policy Route. This access rule, along with the access
profile, must first be constructed before this policy route can be created.
Next Hop IPv4 Address
This is the IP address of the Next Hop router that will have a direct connection to the
Gateway router connected to the Internet.
State
Use the pull-down menu to enable or disable this Policy Route.
Click the
Apply
button to accept the changes made.
Click the
<<Back
button to discard the changes made and return to the previous page.
IP Forwarding Table
The IP forwarding table stores all the direct connected IP information. On this page the user can view all the direct
connected IP information.
To view the following window, click
L3 Features > IP Forwarding Table
, as shown below:
Содержание xStack DES-3810
Страница 1: ......