D-Link xStack DES-3810, Справочное руководство, Страница: 458 / 477

xStack
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
445
exceedType: indicate exceed threshold or recover to normal event, the value
should be “recovered from” or “exceeded”
thesholdSubType: the DDM threshold sub type, the value should be “high” or
“low”.
Event description: DDM exceeded or recover from DDM warning threshold
Log Message: Port <portNum> SFP [thresholdType] [exceedType] the
[thresholdSubType] warning threshold
Parameters description:
portNum: The port number.
thresholdType: the DDM threshold type. The value should be one of the
following values: temperature, supply voltage, bias current, TX power, RX
power.
exceedType: indicate exceed threshold or recover to normal event, the value
should be “recovered from” or “exceeded”
thesholdSubType: the DDM threshold sub type, the value should be “high” or
“low”.
Warning
DDM
Event description: DDM exceeded or recover from DDM alarm threshold
Log Message: Port <portNum> SFP [thresholdType] [exceedType] the
[thresholdSubType] alarm threshold
Parameters description:
portNum: The port number.
thresholdType: the DDM threshold type. The value should be one of the
following values: temperature, supply voltage, bias current, TX power, RX
power.
exceedType: indicate exceed threshold or recover to normal event, the value
should be “recovered from” or “exceeded”
thesholdSubType: the DDM threshold sub type, the value should be “high” or
“low”.
Critical
Event description: DDM exceeded or recover from DDM warning threshold
Log Message: Port <portNum> SFP [thresholdType] [exceedType] the
[thresholdSubType] warning threshold
Parameters description:
portNum: The port number.
thresholdType: the DDM threshold type. The value should be one of the
following values: temperature, supply voltage, bias current, TX power, RX
power.
exceedType: indicate exceed threshold or recover to normal event, the value
should be “recovered from” or “exceeded”
thesholdSubType: the DDM threshold sub type, the value should be “high” or
“low”.
Warning
TFTP Client
Event description: Firmware upgraded successfully.
Log Message: Firmware upgrade by <session> successfully (Username:
<username>, IP: <ipaddr>, MAC: <macaddr>)
Parameters description:
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Informational
Event description: Firmware upgrade was unsuccessful.
Log Message: Firmware upgrade by <session> was unsuccessful (Username:
<username>, IP: <ipaddr>, MAC: <macaddr>)
Parameters description:
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Warning
Event description: Firmware successfully uploaded.
Log Message: Firmware successfully uploaded by <session> (Username:
<username>, IP: <ipaddr>, MAC: <macaddr>)
Parameters description:
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Informational
Event description: Firmware upload was unsuccessful.
Log Message: Firmware upload by <session> was unsuccessful! (Username:
<username>, IP: <ipaddr>, MAC: <macaddr>)
Parameters description:
session: The user’s session.
Username: Represent current login user.
Ipaddr: Represent client IP address.
Warning
Event description: Configuration successfully downloaded.
Log Message: Configuration successfully downloaded by <session>
Informational