D-Link xStack DES-3810 Скачать руководство пользователя страница 330

Страница: 330 / 477

xStack

DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide

317

WAC User Settings

Users can view and set local database user accounts for Web authentication.

To view the following window, click

Security > Web-based Access Control (WAC) > WAC User Settings

, as shown

below:

Figure 9-44 WAC User Settings window

The fields that can be configured are described below:

Parameter

Description

User Name

Enter the user name of up to 15 alphanumeric characters of the guest wishing to access

the Web through this process. This field is for administrators who have selected

Local

their Web-based authenticator.

VLAN Name

Click the button and enter a VLAN Name in this field.

VID (1-4094)

Click the button and enter a VID in this field.

Password

Enter the password the administrator has chosen for the selected user. This field is case-

sensitive and must be a complete alphanumeric string. This field is for administrators who

have selected

Local

as their Web-based authenticator.

Confirm Password

Retype the password entered in the previous field.

Click the

Apply

button to accept the changes made.

Click the

Delete All

button to remove all the entries listed.

Click the

Edit VLAN Name

button to re-configure the specific entry’s VLAN Name.

Click the

Edit VID

button to re-configure the specific entry’s VLAN ID.

Click the

Clear VLAN

button to remove the VLAN information from the specific entry.

Click the

Delete

button to remove the specific entry.

NOTE:

WAC Usernames and Passwords should be less than 16 characters.

WAC Port Settings

Users can view and set port configurations for Web authentication.

To view the following window, click

Security > Web-based Access Control (WAC) > WAC Port Settings

, as shown

below:

Содержание xStack DES-3810






























































































































































































































































































































































































































































































Результаты поиска

Содержание xStack DES-3810

Отзывы:

D-Link xStack DES-3810, Справочное руководство, Страница: 330 / 477

Результаты поиска

Содержание xStack DES-3810

Отзывы: