D-Link xStack DES-3810 Скачать руководство пользователя страница 241

Страница: 241 / 477

xStack

DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide

228

Parameter

Description

Priority

Specifies the priority value that will be applied to the selected Class ID.

Class ID

Specifies the Class ID used here. Once a priority has been assigned to the port groups on

the Switch, then a Class may be assigned to each of the eight levels of 802.1p priorities.

User priority mapping is not only for the default priority configured in the last page, but

also for all the incoming tagged packets with 802.1p tag.

Click the

Apply

button to accept the changes made.

Bandwidth Control

The bandwidth control settings are used to place a ceiling on the transmitting and receiving data rates for any selected

port.

Bandwidth Control Settings

The Effective RX/TX Rate refers to the actual bandwidth of the switch port, if it does not match the configured rate.

This usually means that the bandwidth has been assigned by a higher priority resource, such as a RADIUS server.

To view the following window, click

QoS > Bandwidth Control > Bandwidth Control Settings

, as shown below:

Figure 7-4 Bandwidth Control Settings window

The fields that can be configured are described below:

Parameter

Description

From Port / To Port

Select a range of ports to be configured.

Type

This drop-down menu allows a selection between

(receive),

(transmit), and

Both

This setting will determine whether the bandwidth ceiling is applied to receiving,

transmitting, or both receiving and transmitting packets.

Содержание xStack DES-3810






























































































































































































































































































































































































































































































Результаты поиска

Содержание xStack DES-3810

Отзывы:

D-Link xStack DES-3810, Справочное руководство, Страница: 241 / 477

Результаты поиска

Содержание xStack DES-3810

Отзывы: