xStack
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
279
Figure 8-54 Add Egress ACL Profile window (IPv4 ACL)
The fields that can be configured are described below:
Parameter
Description
Profile ID (1-500)
Enter a unique identifier number for this profile set. This value can be set from 1 to 500.
Profile Name
Enter a profile name for the profile created.
Select ACL Type
Select profile based on Ethernet (MAC Address), IPv4 address, or IPv6 address. This
will change the window according to the requirements for the type of profile.
Select Ethernet ACL to instruct the Switch to examine the layer 2 part of each packet
header.
Select IPv4 ACL to instruct the Switch to examine the IPv4 address in each frame's
header.
Select IPv6 ACL
to instruct the Switch to examine the IPv6 address in each frame's
header.
802.1Q VLAN
Selecting this option instructs the Switch to examine the 802.1Q VLAN identifier of each
packet header and use this as the full or partial criterion for forwarding.
IPv4 DSCP
Selecting this option instructs the Switch to examine the DiffServ Code part of each
packet header and use this as the, or part of the criterion for forwarding.
IPv4 Source IP Mask
Enter an IP address mask for the source IP address.
IPv4 Destination IP Mask
Enter an IP address mask for the destination IP address.
Protocol
Selecting this option instructs the Switch to examine the protocol type value in each
frame's header. Then the user must specify what protocol(s) to include according to the
following guidelines:
Select
ICMP
to instruct the Switch to examine the Internet Control Message Protocol
(ICMP) field in each frame's header.
Select
Type
to further specify that the access profile will apply an ICMP type value, or
specify Code to further specify that the access profile will apply an ICMP code value.
Select
IGMP
to instruct the Switch to examine the Internet Group Management Protocol
(IGMP) field in each frame's header.
Содержание xStack DES-3810
Страница 1: ......