D-Link xStack DES-3810, Справочное руководство

Страница: 120 / 477

xStack
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
107
LACP Port Settings
In conjunction with the
Trunking
window, users can create port trunking groups on the Switch. Using the following
window, the user may set which ports will be active and passive in processing and sending LACP control frames.
To view the following window, click
L2 Features > Link Aggregation > LACP Port Settings
, as shown below:
Figure 5-40 LACP Port Settings sindow
The fields that can be configured are described below:
Parameter Description
From Port / To Port
Select a range of ports to be configured.
Activity Active
- Active LACP ports are capable of processing and sending LACP control frames.
This allows LACP compliant devices to negotiate the aggregated link so the group may be
changed dynamically as needs require. In order to utilize the ability to change an
aggregated port group, that is, to add or subtract ports from the group, at least one of the
participating devices must designate LACP ports as active. Both devices must support
LACP.
Passive
- LACP ports that are designated as passive cannot initially send LACP control
frames. In order to allow the linked port group to negotiate adjustments and make
changes dynamically, one end of the connection must have "active" LACP ports (see
above).
Click the
Apply
button to accept the changes made.
FDB
Static FDB Settings
Unicast Static FDB Settings
Users can set up static unicast forwarding on the Switch.