D-Link xStack DES-3810 Скачать руководство пользователя страница 31

Страница: 31 / 477

xStack

DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide

Figure 2-18 System Log Server Settings window

The fields that can be configured are described below:

Parameter

Description

Server ID

Syslog server settings index (1 to 4).

Severity

This drop-down menu allows you to select the higher level of messages that will be

sent. All messages which level is higher than selecting level will be sent. The options

are Emergency, Alert, Critical, Error, Warning, Notice, Informational and Debug.

Server IPv4 Address

The IPv4 address of the Syslog server.

Server IPv6 Address

The IPv6 address of the Syslog server.

Facility

Use the drop-down menu to select Local 0, Local 1, Local 2, Local 3, Local 4, Local 5,

Local 6, or Local 7.

UDP Port

Type the UDP port number used for sending Syslog messages. The default is 514.

Status

Choose Enabled or Disabled to activate or deactivate.

Click the

Apply

button to accept the changes made.

Click the

Delete All

button to remove all servers configured.

Click the

Edit

button to re-configure the specified entry.

Click the

Delete

button to remove the specified entry.

System Log

Users can view and delete the local history log as compiled by the Switch's management agent.

To view the following window, click

System Configuration > System Log Configuration > System Log

, as

shown below:

Figure 2-19 System Log window

The fields that can be configured or displayed are described below:

Parameter

Description

Содержание xStack DES-3810






























































































































































































































































































































































































































































































Результаты поиска

Содержание xStack DES-3810

Отзывы:

D-Link xStack DES-3810, Справочное руководство, Страница: 31 / 477

Результаты поиска

Содержание xStack DES-3810

Отзывы: