xStack
®
DES-3810 Series Layer 3 Managed Ethernet Switch Web UI Reference Guide
300
To view this window, click
Security > 802.1X > Initialize Port(s)
as shown below:
Figure 9-21 Initialize Port(s) - Port-based window
Figure 9-22 Initialize Port(s) - MAC-based window
The fields that can be configured are described below:
Parameter
Description
From Port / To Port
Use the drop-down menus to select a range of ports to initialize.
MAC Address
Select and enter the appropriate MAC address used here. This option is only available
when the
Authentication Mode
has been set to
MAC-based
in the
802.1X Global
Settings
window.
Click the
Apply
button to accept the changes made.
NOTE:
The user must first globally enable
Authentication Mode
in the
Error! Reference source not found.
window before initializing ports. Information in this window cannot be viewed before enabling the
authentication mode for either
Port-based
or
MAC-based
.
Reauthenticate Port(s)
This window is used to re-authenticate the device connected with the ports and display the current status of the re-
authenticated port-based port(s).
This window appears when the
Authentication State
is enabled in
802.1X Global Settings
window.
To view this window, click
Security > 802.1X > Reauthenticate Port(s)
as shown below:
Figure 9-23 Reauthenticate Port(s) - Port-based window
Figure 9-24 Reauthenticate Port(s) - MAC-based window
The fields that can be configured are described below:
Содержание xStack DES-3810
Страница 1: ......