manualshive.com logo in svg

D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 71 / 566

Поделиться
Скачать
D-Link DWS-4000 Series Скачать руководство пользователя страница 71

  63

Port-Based Network Access Control Commands

 

Note: 

MAC-based dot1x authentication is supported on the BCM56224, BCM56514, BCM56624, and BCM56820

platforms.

Term

Definition

Port

The interface whose configuration is displayed.

Protocol Version

The protocol version associated with this port. The only possible value is 1, corresponding to the first 
version of the dot1x specification.

PAE Capabilities

The port access entity (PAE) functionality of this port. Possible values are Authenticator or Supplicant.

Control Mode

The configured control mode for this port. Possible values are force-unauthorized | force-authorized | 
auto | mac-based.

Authenticator PAE 
State

Current state of the authenticator PAE state machine. Possible values are Initialize, Disconnected, 
Connecting, Authenticating, Authenticated, Aborting, Held, ForceAuthorized, and ForceUnauthorized. 
When MAC-based authentication is enabled on the port, this parameter is deprecated.

Backend 
Authentication 
State

Current state of the backend authentication state machine. Possible values are Request, Response, 
Success, Fail, Timeout, Idle, and Initialize. When MAC-based authentication is enabled on the port, 
this parameter is deprecated.

Quiet Period

The timer used by the authenticator state machine on this port to define periods of time in which it will 
not attempt to acquire a supplicant. The value is expressed in seconds and will be in the range 0 and 
65535.

Transmit Period

The timer used by the authenticator state machine on the specified port to determine when to send an 
EAPOL EAP Request/Identity frame to the supplicant. The value is expressed in seconds and will be 
in the range of 1 and 65535.

Guest-VLAN ID

The guest VLAN identifier configured on the interface.

Guest VLAN Period

The time in seconds for which the authenticator waits before authorizing and placing the port in the 
Guest VLAN, if no EAPOL packets are detected on that port.

Supplicant 
Timeout

The timer used by the authenticator state machine on this port to timeout the supplicant. The value is 
expressed in seconds and will be in the range of 1 and 65535.

Server Timeout

The timer used by the authenticator on this port to timeout the authentication server. The value is 
expressed in seconds and will be in the range of 1 and 65535.

Maximum 
Requests

The maximum number of times the authenticator state machine on this port will retransmit an EAPOL 
EAP Request/Identity before timing out the supplicant. The value will be in the range of 1 and 10.

Vlan-assigned

The VLAN assigned to the port by the radius server. This is only valid when the port control mode is 
not Mac-based.

VLAN Assigned 
Reason

The reason the VLAN identified in the VLAN-assigned field has been assigned to the port. Possible 
values are RADIUS, Unauthenticated VLAN, Guest VLAN, default, and Not Assigned. When the VLAN 
Assigned Reason is Not Assigned, it means that the port has not been assigned to any VLAN by dot1x. 
This only valid when the port control mode is not MAC-based.

Reauthentication 
Period

The timer used by the authenticator state machine on this port to determine when reauthentication of 
the supplicant takes place. The value is expressed in seconds and will be in the range of 1 and 65535.

Reauthentication 
Enabled

Indicates if reauthentication is enabled on this port. Possible values are ‘True” or “False”.

Key Transmission 
Enabled

Indicates if the key is transmitted to the supplicant for the specified port. Possible values are True or 
False.

Control Direction

The control direction for the specified port or ports. Possible values are both or in.

Maximum Users

The maximum number of clients that can get authenticated on the port in the MAC-based dot1x 
authentication mode. This value is used only when the port control mode is not MAC-based.

Содержание DWS-4000 Series























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов