D-Link DWS-4000 Series Скачать руководство пользователя страница 459

Страница: 459 / 566

451

DHCP Server Commands

The following additional fields are displayed for Manual pool type:

show ip dhcp server statistics

This command displays DHCP server statistics.

Message Received:

Message Sent:

Field

Definition

Client Name

The name of a DHCP client.

Client Identifier

The unique identifier of a DHCP client.

Hardware Address

The hardware address of a DHCP client.

Hardware Address
Type

The protocol of the hardware platform.

Host

The IP address and the mask for a manual binding to a DHCP client.

Format

show ip dhcp server statistics

Modes

•

Privileged EXEC

•

User EXEC

Field

Definition

Automatic
Bindings

The number of IP addresses that have been automatically mapped to the MAC addresses of hosts that
are found in the DHCP database.

Expired Bindings

The number of expired leases.

Malformed
Bindings

The number of truncated or corrupted messages that were received by the DHCP server.

Message

Definition

DHCP DISCOVER

The number of DHCPDISCOVER messages the server has received.

DHCP REQUEST

The number of DHCPREQUEST messages the server has received.

DHCP DECLINE

The number of DHCPDECLINE messages the server has received.

DHCP RELEASE

The number of DHCPRELEASE messages the server has received.

DHCP INFORM

The number of DHCPINFORM messages the server has received.

Message

Definition

DHCP OFFER

The number of DHCPOFFER messages the server sent.

DHCP ACK

The number of DHCPACK messages the server sent.

DHCP NACK

The number of DHCPNACK messages the server sent.

Содержание DWS-4000 Series
















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DWS-4000 Series

Отзывы:

D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 459 / 566

Результаты поиска

Содержание DWS-4000 Series

Отзывы: