D-Link DWS-4000 Series Скачать руководство пользователя страница 535

Страница: 535 / 566

527

Switching

WITCHING

SSLT

SSLT: Msg Queue is full, event = XXXX

Failed to send the received message to the SSLT
message queue as message queue is full. XXXX
indicates the event to be sent.

SSLT

SSLT: Unknown UI event in message,
event = XXXX

Failed to dispatch the received UI event to the
appropriate SSLT function as it’s an invalid event.
XXXX indicates the event to be dispatched.

SSLT

ssltApiCnfgrCommand: Failed calling
ssltIssueCmd.

Failed to send the message to the SSLT message
queue.

SSLT

SSLT: Error loading certificate from file XXXX

Failed while loading the SSLcertificate from
specified file. XXXX indicates the file from where
the certificate is being read.

SSLT

SSLT: Error loading private key from file

Failed while loading private key for SSL
connection.

SSLT

SSLT: Error setting cipher list (no valid ciphers)

Failed while setting cipher list.

SSLT

SSLT: Could not delete the SSL semaphores

Failed to delete SSL semaphores during
cleanup.of all resources associated with the
OpenSSL Locking semaphores.

Table 28: User_Manager Log Messages

Component

Message

Cause

User_Manager

User Login Failed for XXXX

Failed to authenticate user login. XXXX indicates
the username to be authenticated.

User_Manager

Access level for user XXXX could not be
determined. Setting to READ_ONLY.

Invalid access level specified for the user. The
access level is set to READ_ONLY. XXXX
indicates the username.

User_Manager

Could not migrate config file XXXX from version
YYYY to ZZZZ. Using defaults.

Failed to migrate the config file. XXXX is the config
file name. YYYY is the old version number and
ZZZZ is the new version number.

Table 29: Protected Ports Log Messages

Component

Message

Cause

Protected Ports

Protected Port: failed to save configuration

This appears when the protected port configuration
cannot be saved.

Protected Ports

protectedPortCnfgrInitPhase1Process: Unable to
create r/w lock for protectedPort

This appears when protectedPortCfgRWLock
Fails.

Protected Ports

protectedPortCnfgrInitPhase2Process: Unable to
register for VLAN change callback

This appears when nimRegisterIntfChange with
VLAN fails.

Protected Ports

Cannot add intIfNum xxx to group yyy

This appears when an interface could not be
added to a particular group.

Table 27: SSLT Log Messages

Component

Message

Cause

Содержание DWS-4000 Series
















































































































































































































































































































































































































































































































































































Результаты поиска

Содержание DWS-4000 Series

Отзывы:

D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 535 / 566

Результаты поиска

Содержание DWS-4000 Series

Отзывы: