D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 350 / 566

D-Link Unified Switch CLI Command Reference
342
© 2009 D-Link Corporation. All Rights Reserved
show wireless client detected-client triangulation
Use this command to display the signal triangulation status for the specified client entry.
show wireless wids-security client
Use this command to display the configured wireless WIDS security settings for the client.
Format
show wireless client <macaddr> detected-client triangulation
Mode Privileged EXEC
Field Description
AP Function Indicates whether the reporting AP is operating in Sentry Mode.
AP Mac Address The Ethernet address of the AP.
RSSI The RSSI value of received signal for the client at the reporting AP.
Signal The RF signal strength perceived by the reporting AP in dBm for the specified detected-client.
Noise The RF Noise perceived by the reporting AP for the specified detected-client.
Detected Time Time in seconds since the particular AP detected the signal.
Format
show wireless wids-security client
Mode Privileged EXEC
Field Description
Rogue Detected
Trap Interval Interval, in seconds, between transmissions of the SNMP trap that indicates the administrator that
rogue APs are present in the RF Scan database. If set to 0, the trap is never sent.
Rogue-Not in
Known Client List If client MAC address is not in the Known Client database, then report the client as Rogue.
Rogue-Exceeds
Auth Req If the client exceeds the configured rate for transmitting 802.11 authentication requests, report the
client as Rogue.
Rogue-Exceeds
DeAuth Reg If the client exceeds the configured rate for transmitting 802.11 de-authentication requests, report the
client as Rogue.
Rogue-Exceeds
Probe Req If the client exceeds the configured rate for transmitting probe requests, report the client as Rogue.
Rogue-Exceeds
Failed Auth If the client exceeds the maximum number of failing authentications, report the client as Rogue.
Rogue-Auth
Unknown AP If the Known Client is authenticated with an Unknown AP, report the client as Rogue.
Client Threat-
Mitigation Indicates whether Client Threat Mitigation is enabled or not.
De-auth Threshold
Interval The number of seconds for counting the de-authentication messages.
De-auth Threshold
Value The maximum number of de-authentication messages the client can send without being reported as
rogue.
Auth Threshold
Interval The number of seconds for counting the authentication messages.