D-Link DWS-4000 Series Скачать руководство пользователя страница 505 | Manualshive

Страница: 505 / 566

D-Link DWS-4000 Series Скачать руководство пользователя страница 505

497

SNMP Commands

no snmp-server community ipaddr

This command sets a client IP address for an SNMP community to 0.0.0.0. The name is the applicable community name.

snmp-server community ipmask

This command sets a client IP mask for an SNMP community. The address is the associated community SNMP packet
sending address and is used along with the client IP address value to denote a range of IP addresses from which SNMP
clients may use that community to access the device. A value of 255.255.255.255 will allow access from only one station,
and will use that machine's IP address for the client IP address. A value of 0.0.0.0 will allow access from any IP address.
The name is the applicable community name.

no snmp-server community ipmask

This command sets a client IP mask for an SNMP community to 0.0.0.0. The name is the applicable community name. The
community name may be up to 16 alphanumeric characters.

snmp-server community mode

This command activates an SNMP community. If a community is enabled, an SNMP manager associated with this
community manages the switch according to its access right. If the community is disabled, no SNMP requests using this
community are accepted. In this case the SNMP manager associated with this community cannot manage the switch until
the Status is changed back to Enable.

no snmp-server community mode

This command deactivates an SNMP community. If the community is disabled, no SNMP requests using this community are
accepted. In this case the SNMP manager associated with this community cannot manage the switch until the Status is
changed back to Enable.

Format

no snmp-server community ipaddr

<name>

Mode

Global Config

Default

0.0.0.0

Format

snmp-server community ipmask

<ipmask> <name>

Mode

Global Config

Format

no snmp-server community ipmask

<name>

Mode

Global Config

Default

•

private and public communities - enabled

•

other four - disabled

Format

snmp-server community mode

<name>

Mode

Global Config

Format

no snmp-server community mode

<name>

Mode

Global Config

«
...
503
504
505
506
507
...
»

Содержание DWS-4000 Series























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов