D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 312 / 566

D-Link Unified Switch CLI Command Reference
304
© 2009 D-Link Corporation. All Rights Reserved
show wireless ap radio radar status
This command displays radar status for each radio on a WS managed AP. All parameters are required. The radar status is
displayed for mode
a radios only. For b/g mode radios, an error is displayed.
Example:
The following shows example CLI display output for the command.
(DWS-4026) #show wireless ap 00:22:B0:3A:C1:80 radio 1 radar status
Radar Detection Radar Detected Last Radar
Channel Required Status Detected Time
------- ------------------- ---------------- ----------------
36 No No 0d:00:00:00
44 No No 0d:00:00:00
52 Yes No 0d:00:00:00
60 Yes No 0d:00:00:00
100 Yes No 0d:00:00:00
108 Yes No 0d:00:00:00
116 Yes No 0d:00:00:00
124 Yes No 0d:00:00:00
132 Yes No 0d:00:00:00
149 No No 0d:00:00:00
157 No No 0d:00:00:00
Format
show wireless ap <mac-addr> radio <1-2> radar status
Mode Privileged EXEC
Field Description
macaddr WS managed AP MAC address
1-2 The radio interface on the AP.
Channel The list of channels available on the specified radio.
Radar Detection
Required In some regulatory domains, radar detection is required on some channels in the 5 GHz band. If radar
detection is required on the channel, the AP uses the 802.11h specification to avoid interference with
other wireless devices.
Radar Detected
Status Indicates whether another 802.11 device was detected on the channel.
Last Radar
Detected Time Shows the amount of time that has passed since the device was last detected on the channel.