D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 328 / 566

D-Link Unified Switch CLI Command Reference
320
© 2009 D-Link Corporation. All Rights Reserved
C
LIENT
F
AILURE AND
A
D
H
OC
S
TATUS
C
OMMANDS
The commands in this section provide views and management of data maintained for wireless client association and
authentication failures.
clear wireless client failure list
This command deletes all entries from the client failure list. Entries normally age out according to the configured age time.
Example: The following shows an example of the command.
(DWS-4026) #clear wireless client failure list
Are you sure you want to clear all client failure entries? (y/n) y
All client failure entries cleared.
clear wireless client adhoc list
This command deletes all entries from the Ad Hoc client list. Entries normally age out according to the configured age time.
show wireless client failure status
This command displays the client failure status parameters.
Format
clear wireless client failure list
Mode Privileged EXEC
Format
clear wireless client adhoc list
Mode Privileged EXEC
Format
show wireless client [<macaddr>] failure status
Mode Privileged EXEC
Field Description
macaddr Client MAC address.
MAC Address The Ethernet address of the client.
VAP MAC Address The managed AP VAP Ethernet MAC address on which the client attempted to associate and/or
authenticate.
SSID The network SSID on which the client attempted to associate and/or authenticate.
Last Failure Type Indicates the last type of failure that occurred.
Authentication
Failure Count Count of authentication failures for this client.
Association Failure
Count Count of association failures for this client.
Age Time since failure occurred.