D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 530 / 566

D-Link Unified Switch CLI Command Reference
522
© 2009 D-Link Corporation. All Rights Reserved
NIM NIM: event(x),intf(x),component(x), in wrong
phase An event was issued to NIM during the wrong
configuration phase (probably Phase 1, 2, or
WMU).
NIM NIM: Failed to notify users of interface change Event was not propagated to the system.
NIM NIM: failed to send message to NIM message
Queue. NIM message queue full or non-existent.
NIM NIM: Failed to notify the components of
L7_CREATE event Interface not created.
NIM NIM: Attempted event (x), on USP x.x.x before
phase 3 A component issued an interface event during the
wrong initialization phase.
NIM NIM: incorrect phase for operation An API call was made during the wrong
initialization phase.
NIM NIM: Component(x) failed on event(x) for
intIfNum(x) A component responded with a fail indication for an
interface event.
NIM NIM: Timeout event(x), intIfNum(x) remainingMask
= xxxx A component did not respond before the NIM
timeout occurred.
Table 14: System Log Messages
Component Message Cause
SYSTEM Configuration file fastpath.cfg size is 0 (zero) bytes The configuration file could not be read. This
message may occur on a system for which no
configuration has ever been saved or for which
configuration has been erased.
SYSTEM could not separate SYSAPI_CONFIG_FILENAME The configuration file could not be read. This
message may occur on a system for which no
configuration has ever been saved or for which
configuration has been erased.
SYSTEM Building defaults for file <file name> version
<version num> Configuration did not exist or could not be read for
the specified feature or file. Default configuration
values will be used. The file name and version are
indicated.
SYSTEM File <filename>: same version (version num) but
the sizes (<version size>-><expected version size)
differ The configuration file which was loaded was of a
different size than expected for the version
number. This message indicates the configuration
file needed to be migrated to the version number
appropriate for the code image. This message may
appear after upgrading the code image to a more
current release.
SYSTEM Migrating config file <filename> from version
<version num> to <version num> The configuration file identified was migrated from
a previous version number. Both the old and new
version number are specified. This message may
appear after upgrading the code image to a more
current release.
SYSTEM Building Defaults Configuration did not exist or could not be read for
the specified feature. Default configuration values
will be used.
Table 13: NIM Log Messages (Cont.)
Component Message Cause