D-Link DWS-4000 Series Скачать руководство пользователя страница 254 | Manualshive

Страница: 254 / 566

D-Link DWS-4000 Series Скачать руководство пользователя страница 254

D-Link Unified Switch CLI Command Reference

246

© 2009 D-Link Corporation. All Rights Reserved

client-qos bandwidth-limit

This command configures the default maximum bandwidth rate limit in bits per second used by clients associated with this
network that do not obtain their own value via RADIUS.

no client-qos bandwidth-limit

The

no

version of this command sets the client QoS default maximum bandwidth rate limit parameter to 0 for this network,

disabling rate limiting for clients that associate with this network and use this default value.

client-qos diffserv-policy

This command configures the default Diffserv policy used by clients associated with this network that do not obtain their own
value via RADIUS. The

<policy-name>

parameter is a case-sensitive alphanumeric string from 1 to 31 characters and

must specify a Diffserv policy that currently exists in the Unified Switch.

no client-qos diffserv-policy

The

no

version of this command removes the client QoS default Diffserv policy parameter configured for this network.

client-qos enable

This command enables AP client QoS operation for the network. When enabled, and when the wireless global client QoS
mode is also enabled, clients associated to this network may have one or more of the following QoS facilities in effect in the
down and/or up directions: access control, bandwidth limiting, and Differentiated services (via policy).

Note:

The specified value is subject to rounding down to the nearest 64000 in the AP, with a minimum rounded

value of 64000.

Format

client-qos bandwidth-limit

{down | up} {1-4294967295}

Mode

Network Config

Format

no client-qos bandwidth-limit

{down | up}

Mode

Network Config

Format

client-qos diffserv-policy

{down | up} <policy-name>

Mode

Network Config

Format

no client-qos diffserv-policy

{down | up}

Mode

Network Config

Note:

This command takes effect in an AP without requiring that the AP profile be reapplied.

Default

disable

Format

client-qos enable

Mode

Network Config

«
...
252
253
254
255
256
...
»

Содержание DWS-4000 Series























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов