D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 246 / 566

D-Link Unified Switch CLI Command Reference
238
© 2009 D-Link Corporation. All Rights Reserved
no location
The
no
version of this command deletes the current location string for the AP.
password (AP Config Mode)
This command configures the password that this AP must use to authenticate to the Unified Switch. The password is only
verified if global AP authentication is enabled. After you enter the password, the CLI prompts you to enter a password that
is between 8-63 alphanumeric characters.
no password
The
no
version of this command deletes the password for the AP.
Example:
The following shows an example of the command.
DWS-4026 (Config-ap)# password ?
<cr> Press Enter to execute the command.
DWS-4026 (Config-ap)# password <cr>
Enter Password (8 - 63 characters):<enter here>
Re-enter password:<enter same here>
DWS-4026 (Config-ap)# no password <cr>
DWS-4026 (Config-ap)#
password encrypted
This command configures the password that this AP must use to authenticate to the Unified Switch. The password is only
verified if global AP authentication is enabled. The command accepts the AP password in an encrypted format.
Format
location <value>
Mode AP Config
Parameter Description
value This parameter is an AP location string. It should not be more than 32 characters long. To use spaces
in the location, enclose the value with quotes, for example "Conference Room A".
Format
no location
Mode AP Config
Default The default password is blank.
Format
password
Mode AP Config
Format
no password
Mode AP Config