D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 491 / 566

483
Management Security Commands
sshcon timeout
This command sets the SSH connection session timeout value, in minutes. A session is active as long as the session has
been idle for the value set. The time is a decimal value from 1 to 160.
Changing the timeout value for active sessions does not become effective until the session is re accessed. Also, any
keystroke activates the new timeout duration.
no sshcon timeout
This command sets the SSH connection session timeout value, in minutes, to the default.
Changing the timeout value for active sessions does not become effective until the session is re accessed. Also, any
keystroke activates the new timeout duration.
show ip ssh
This command displays the ssh settings.
M
ANAGEMENT
S
ECURITY
C
OMMANDS
This section describes commands you use to generate keys and certificates, which you can do in addition to loading them
as before.
Default 5
Format
sshcon timeout <1-160>
Mode Privileged EXEC
Format
no sshcon timeout
Mode Privileged EXEC
Format
show ip ssh
Mode Privileged EXEC
Term Definition
Administrative
Mode This field indicates whether the administrative mode of SSH is enabled or disabled.
Protocol Level The protocol level may have the values of version 1, version 2 or both versions 1 and version 2.
SSH Sessions
Currently Active The number of SSH sessions currently active.
Max SSH Sessions
Allowed The maximum number of SSH sessions allowed.
SSH Timeout The SSH timeout value in minutes.
Keys Present Indicates whether the SSH RSA and DSA key files are present on the device.
Key Generation in
Progress Indicates whether RSA or DSA key files generation is currently in progress.