D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 203 / 566

195
Routing Information Protocol Commands
redistribute (RIP)
This command configures RIP protocol to redistribute routes from the specified source protocol/routers. There are five
possible match options. Internal routes are redistributed by default.
no redistribute
This command de-configures RIP protocol to redistribute routes from the specified source protocol/routers.
show ip rip
This command displays information relevant to the RIP router.
Default • metric—not-configured
• match—internal
Format for
source
protocol
redistribute {static | connected} [metric <0-15>]
Mode Router RIP Config
Format
no redistribute {static | connected} [metric] [match [internal] [external 1]
[external 2] [nssa-external 1] [nssa-external-2]]
Mode Router RIP Config
Format
show ip rip
Modes • Privileged EXEC
• User EXEC
Term Definition
RIP Admin Mode Enable or disable.
Split Horizon Mode None, simple or poison reverse.
Auto Summary
Mode Enable or disable. If enabled, groups of adjacent routes are summarized into single entries, in order to
reduce the total number of entries The default is enable.
Host Routes
Accept Mode Enable or disable. If enabled the router accepts host routes. The default is enable.
Global Route
Changes The number of route changes made to the IP Route Database by RIP. This does not include the refresh
of a route's age.
Global queries The number of responses sent to RIP queries from other systems.
Default Metric The default metric of redistributed routes if one has already been set, or blank if not configured earlier.
The valid values are 1 to 15.
Default Route
Advertise The default route.