D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 396 / 566

D-Link Unified Switch CLI Command Reference
388
© 2009 D-Link Corporation. All Rights Reserved
mirror
This command specifies that all incoming packets for the associated traffic stream are copied to a specific egress interface
(physical port or LAG).
conform-color
Use this command to enable color-aware traffic policing and define the conform-color class map. Used in conjunction with
the police command where the fields for the conform level are specified. The
<class-map-name>
parameter is the name
of an existing DiffServ class map.
class
This command creates an instance of a class definition within the specified policy for the purpose of defining treatment of
the traffic class through subsequent policy attribute statements. The
<classname>
is the name of an existing DiffServ class.
no class
This command deletes the instance of a particular class and its defined treatment from the specified policy.
<classname>
is the names of an existing DiffServ class.
Format
mirror <slot/port>
Mode Policy-Class-Map Config
Incompatibilities Drop, Redirect
Note: This command may only be used after specifying a police command for the policy-class instance.
Format
conform-color <class-map-name>
Mode Policy-Class-Map Config
Note: This command causes the specified policy to create a reference to the class definition.
Note: The CLI mode is changed to Policy-Class-Map Config when this command is successfully executed.
Format
class <classname>
Mode Policy-Map Config
Note: This command removes the reference to the class definition for the specified policy.
Format
no class <classname>
Mode Policy-Map Config