D-Link DWS-4000 Series, Справочник команд интерфейса командной строки, Страница: 502 / 566

D-Link Unified Switch CLI Command Reference
494
© 2009 D-Link Corporation. All Rights Reserved
passwd
This command allows the currently logged in user to change his or her password without having read/write privileges.
passwords min-length
Use this command to enforce a minimum password length for local users. The value also applies to the enable password.
The valid range is 8-64.
no passwords min-length
Use this command to set the minimum password length to the default value.
passwords history
Use this command to set the number of previous passwords that shall be stored for each user account. When a local user
changes his or her password, the user will not be able to reuse any password stored in password history. This ensures that
users don’t reuse their passwords often. The valid range is 0-10.
no passwords history
Use this command to set the password history to the default value.
passwords aging
Use this command to implement aging on passwords for local users. When a user’s password expires, the user will be
prompted to change it before logging in again. The valid range is 1-365. The default is 0, or no aging.
Format
password <cr>
Mode User EXEC
Default 8
Format
passwords min-length <8-64>
Mode Global Config
Format
no passwords min-length
Mode Global Config
Default 0
Format
passwords history <0-10>
Mode Global Config
Format
no passwords history
Mode Global Config
Default 0
Format
passwords aging <1-365>
Mode Global Config